(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpg)How to Get a Locksmith to Service, Repair Or Replace a Composite Door Lock
It is essential to know how to repair your composite front door replacement door when it is difficult to lock and open or close. A professional Locksmith can repair, service or replace the internal mechanisms of your composite door to ensure it functions as it should.
The majority of minor problems with composite doors can be fixed easily. For instance, if your hinges are slipping, this is typically an easy fix with just a few hinge adjustments.
1. Cylinder is faulty Cylinder
While Composite door Lock replacement doors are incredibly energy-efficient and durable, they aren't immune to the same problems like traditional doors. Many of these issues can be easily fixed and avoided by regular maintenance.
If you're experiencing that your door lock is sticky it could be due to an issue with the euro cylinder. This is a sign that dust and dirt build up in the internal mechanisms of a lock for composite doors. It's simple to fix with a little bit of maintenance.
Put some lubricant into the lock to help you get it working. Make sure you use a lubricant that's designed specifically for doors and locks as other alternatives can cause damage. Once you've lubricated the lock, try to operate it again and it should operate smoothly with minimal resistance.
If the problem is worse than this, you may need to call in a Locksmith to fix the euro cylinder. This is an easy and cost-effective solution that will improve the security of your home. Christopher The Locksmith may also recommend installing additional and enhanced door locks made of composite that will protect your home from burglaries.
A malfunctioning lock mechanism could make it difficult to shut and open your composite door or even close it completely. This could be a major issue if not treated and could affect your home's security. This is a typical issue which can be easily solved by a professional Locksmith.
You can lessen the chance of this happening by throwing your handle up when you close your composite door. Ensure that all locking points are engaged and taking the pressure off of the central lock. Additionally, this helps to prevent the door from warping which could be an important factor in this issue. A professional locksmith can install a high security SS312 diamond or TS007 three-star cylinder that has been Kite Marked by the police and approved to guard against the increasingly frequent practice of “lock-snapping”. The presence of these cylinders can dramatically decrease your chance of being broken into.
2. Faulty Lock
Many homeowners choose composite doors because of their sleek design, enhanced security, and insulation properties. However, just like any other product they will encounter issues occasionally that require a bit of maintenance to resolve. Certain issues could be a nuisance but others may cause security issues for your home and make you more vulnerable to burglars.
A common issue with composite doors is a faulty lock that doesn't open and shut properly or won't close in any way. This is often caused by an improperly aligned hinge, which can be fixed easily by a locksmith who will correct the door and lock mechanism to make it function as it should.
A damaged euro cylinder could also result in a defective lock. If your handle works, but you cannot turn the key to lock the door it could indicate that the euro cylinder requires replacement. This is a different problem that requires the assistance of a professional Locksmith to ensure your security isn't compromised and that it is replaced with a high quality Kite Marked cylinder that has anti-drill, anti-bump and anti-snap features.
Over time, it's not uncommon for the handles on composite doors to break off. This can lead to various issues, including the inability to close or lock the front door. The good news is that this issue can usually be fixed by loosening the screws holding the strike plate and adjusting it horizontally as well as vertically to match the latch. Then tighten the screws and re-tighten your latch to make sure the door is working again.
Composite doors are made of sturdy and durable materials. However, they may become warped over time, which causes the locking mechanisms to become stiff or grating or, in some cases, stops it from closing completely. The most frequent cause is a broken gearbox or the lock case. This requires the assistance of locksmiths Locksmith to replace the gearbox and repair scratch on composite door or replace any other components that may be broken.
3. Sticky Lock
Although they are extremely durable, composite doors are not resistant to the same issues as other types of door. These include a sticky lock that can occur if a door is not properly maintained or properly lubricated. It can also happen when a slamming habit is adopted and wears out the hardware and cause it to become stuck.
There are a variety of quick fixes for a sticky lock. It is first important to ensure that the hole for the key is free of dust, dirt or grime that has developed over time. A container of compressed air can be used to blow air out the hole, making it easier to insert a key. Secondly, it is worthwhile to try a dry lubricant such as powdered graphite to help lubricate the mechanism. This is superior to liquid lubricants like WD-40 which could do more harm than good. The graphite enables you to use the key without squirting much lubricant in the lock. This can stain your hands or other surfaces.
If the lock is still sticking, you can try inserting the key into and out of the keyhole a few times, which should free it up. Spray a small amount directly onto the key, then turn it both ways. This will help to spread the lubricant around the entire mechanism. Also using a graphite pencil could help to loosen the lock if it is stuck. It is important to use it only sparingly since too much can make your lock difficult to operate.
Locksmiths are highly recommended to maintain your multipoint locking system in the event that it becomes stiff and unoperable. This will ensure that it is properly adjusted, preventing the gear teeth from becoming damaged and maintaining the quality of your doors. The Locksmith can also suggest to upgrade your old locks to modern Kite Marked High Security Fitments which won't affect your insurance.
4. Hinges that are damaged
Modern homeowners are opting for composite doors. They provide many benefits, including increased security for homes and a variety of colors and finishes, and are long-lasting and weatherproof. But, as with all things they will face issues over time. Some of these problems may be fixed easily, while others will require the assistance of a professional locksmith.
The hinges on composite door panel replacement doors can break or become stretched. This makes it difficult to open or close the door. It could cause the lock to fail or malfunction. This issue can be easily repaired by tightening the hinges or adjusting them.
Another issue that occurs with composite doors is when they expand due to warm temperatures. This can be caused by a number of factors, including not closing the door properly. It's important to develop the habit of 'throwing' the handle each time you close your composite door. This will activate the locking points on the door, and will stop it from warping or expanding.
A multi-point lock is an excellent way to make your Composite Door as secure as possible. If you find that your lock is starting to malfunction, you must have this resolved as soon as possible. A uPVC or Composite Door Specialist Locksmith can identify the issue quickly and fix the issue.
There are a few typical multi-point locking issues that can be encountered with Composite Doors, but most of them can be solved by a locksmith. Most often, the top case will require adjustments or lubrication, the gearbox in the middle is able to be repaired or replaced if needed, and the lower case may be adjusted or re-aligned as needed.
Before you begin working on an issue with a multi-point lock, you'll need to remove the knob or handle from the door. To do this, look for the seams on the exterior edge and slide a screwdriver or putty knife underneath them. After this is done then you can take off the handle or knob and reveal the internal components that will require adjusting, re-lubricating or replacing.