(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)How to Replace the Replacement Key Battery For the saab 93 key replacement 9-3
Saab owners have a distinct set of steps to take to add an additional key. This requires the use of a handheld computer, known as Tech-2 which is used by the dealer. Then a new car key and transponder are required to be purchased and then programmed into the car.
Rotate your keys to stop one from deteriorating faster than another. This will keep your keys in top condition.
replacement Saab Car Keys Case
The new key fobs for keys are not like the older Saab keys. They feature electronic components that make it difficult to copy. This has made car theft a lot more difficult than it was just a few years ago. It has also made it more costly to replace keys that were lost.
Every owner of a Saab 9-3 needs to have at minimum two working keys. If one is lost, it costs a lot of money to purchase a new one for the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 for this.
There are some ways around these costly. Some parts dealers will use the code of a spare key to cut a brand new metal blade at a fraction that of a dealer. The key, however, must be identical to the original one to function properly in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver and some patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. When the case is opened remove all electronics and put them in your new case. Be sure to put the correct key and badge back into the case, as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four steps. This tutorial should work with any modern Saab key fob. However, the process could differ slightly.
This button is usually placed close to the Saab logo on the back of the fob. This is usually located close to the Saab logo on the back of the fob. Then, use an screwdriver with a flat head to insert into the small hole inside this button. This should be enough to allow you to open the fob case so that you can replace the battery.
Once the new CR1632 battery is in place You can then reassemble the remote key fob. You can then program it to your car. The whole process should take more than a half hour at the most. This is a straightforward procedure that doesn't require special tools.
If you lose your key, the procedure will be somewhat more complex however, it can be accomplished. The dealer must read the car's VIN and then order a new key blade and TWICE module that has the proper unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is a device that locks and unlocks your car. It has an internal battery. They have a limited life span and will eventually fail. This is a regular issue that happens with all cars, and the good news is that you can change the batteries in many key fobs and not have to replace the entire case. You can purchase replacement fobs from Amazon that include all the electronics already installed, which means you can just pop open the case and replace the old batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, you need to insert a small flathead screwsdriver into the slot that is in the middle. The screwdriver should be moved around the case until it is split open, making it simple to take it out.
If you're ready to change your keys, be sure to have a spare in your possession. This will save you a lot of money. If you have an additional key, ask the dealer to cut the key and program it for your car. This is much less expensive than purchasing a new fob.
If you do not have a spare key one, you can add an additional key to your car, however it requires a lot of research and effort. The cost for adding a second key is around a hundred dollars and it also requires the programming of the car's computer. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
The latest SAAB 9-3 features an advanced alarm system that is based on a key code. This means that in the event that you lose your only functioning key, getting another key can be extremely expensive since the car has to have a computer module added and it must also be specifically programmed to accept a new key. Most locksmiths cannot do this or even a dealer will charge several hundreds of dollars just to program the new key!
If you've lost your only working key the dealer will replace the computer in your car (known as the CIM or saab key replacement cost TWICE) to create a replacement, and will charge you the highest price for it. We can reprogram the existing EEPROM inside your car's computer to make it ready for an additional key. This will save you more than 50% on the cost you have to pay an auto dealer.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311135906_1281855972636056_2987376612771239945_nlow.jpg)If you've been an owner of an 03-11 saab 9-3 replacement key 9-3, you likely know that the ignition key isn't all that durable. They can get extremely sticky, and the buttons are known to be removed from them from time to time which is why you should think about buying a new one if the one you have isn't functioning properly. Fortunately, replacing the ignition key isn't as difficult as it seems and can be done quickly with the appropriate tools.
