How to Reduce Your saab key fob repair Key Replacement Cost
You can save a lot of money if you get your spare key made before you lose the one you have. It's typically 2X-10X more expensive to create a brand new key when you're only left with one.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311170119_2306394586188303_2849487588620745484_nlow.jpg)It's simple, inexpensive and simple to replace the battery in your SAAB 9-3 remote. Here's how.
Cost of a Key Replacement
The 03-11 SAAB 9-3 is an excellent car however, its ignition key can be susceptible to wearing down. The case could become sticky and the buttons are known to be pushed out, which can be a huge hassle when driving around. This is why it's recommended to replace the key fob as quickly you spot any issues. This will save you money in the end, and is better than waiting.
You can replace a SAAB's key fob yourself for less than $100. You'll need an additional key fob shell that is compatible with your car and also a new battery. It is necessary to open the case of your old SAAB 9-3 key fob, and then carefully take out the electronics to give you an opportunity to replace the battery. After removing the electronics, you can simply replace the battery and synchronize your key fob with your vehicle.
SAAB keys that have the remote start system require special care because they contain a transponder chip in them which needs to be programmed to your specific vehicle. You'll need the dealer grade Tech 2 tool or its equivalent for your Saab model to do this. This tool is able to identify the code on your existing keys and use the information to program a new key. If you don't have a spare key, this process is a bit more involved and can cost you as much as $500 from the dealer.
A good tip is to look for locksmiths who specialize in Saabs. They can provide you with keys at a lower cost than the dealer. They can also provide other services such as key duplication and replacement so you'll be able to have a backup car key in the event yours gets lost or damaged.
Most European cars made after 2000 come with immobilizer systems, which depend on a microchip that is built inside the key to identify and start your vehicle. This is why these kinds of keys are generally more expensive to duplicate than those that do not have the chip. There are exceptions. VATS keys, for instance (which are mechanical with a resistor inside) do not require programming and can be duplicated relatively inexpensively. However, most post-2000 BMWs, Mercedes, Porsches, and Saab vehicles will require a dealer to duplicate their keys. These manufacturers don't permit their dealers to join NASTF. The NASTF group creates the tools used by other automotive locksmiths to make replacement keys.
Cost of a Replacement Remote
It is crucial to have an extra remote or key if you own a saab spare key with keyless entry. This will give you one in the case that your original key is lost or damaged. If you have insurance that covers key add-ons it will lower the cost of a replacement remote.
Most car keys for cars manufactured after 2000 are programmed by the dealer or locksmith. These keys are usually stored in a tiny EEPROM that can only read by a computer specially designed for this purpose. This means that if you need a new key for your car, you will have to visit the dealer. The positive side is that the dealership will not cost the same amount as a locksmith.
Saab Key battery 9-3s are beautiful cars and many of remain in use in the present. The ignition key is the most significant problem for these cars. The key is small and poorly designed, and can easily fall out or get stuck. Many people have found themselves without a functioning key in several years of purchasing their vehicle.
It's simple to find a spare key for your saab key programming. First, you need to remove the emergency key. It's a simple task that you can complete yourself and you don't need any tools. You should be careful, though, because if you force it too hard then you could damage the electronics within it.
You will then need to find a location where you can buy an OEM replacement key case for your saab 93 key fob replacement. You might not be able to find these cases easily, but if you know where to search, you should have no problem finding one. If you find a replacement case you'll need it programmed and cut to fit your vehicle.
The process of obtaining a new key for your saab ignition key replacement can be expensive but it's worth it in the end. It's a lot cheaper than having to replace the entire vehicle, and it can save you a significant amount of time. If you're left with one working key, it's ideal to replace it as soon as you can. You don't know when you're likely to lose it, which could cause lots of frustration and cost.