How to Replace a UPVC Window Handle
Don't be worried when your upvc handle has become broken. Replacing a window handle made of upvc is a fairly simple job and can be accomplished in just a few steps.
No matter if you have an in-line or a crank espagnolette window handle each one has an oval spindle protruding from the back plate. This spindle is then placed into the locking device.
Identify the type and size of the lock and handle
Over time window handles and locks could get damaged or lose functionality. The good news is that this can often be remedied without replacing the entire uPVC window unit. One of the first things to do is determine the type of lock and handle you have because this will help determine what parts will be required for replacement.
You can determine the type of handle by looking at its base. A screw or pin is what holds the handle to its base. If the screw is gone it could indicate that the handle is separated from the base. If the handle is split internally and does not grip the spindle anymore it could be an indication that the handle needs to be replaced.
There are a variety of different kinds of uPVC window handles The most well-known is the Espag handle. They are usually secured with two bolts and the spindle is connected to the locking mechanism in the frame of the window. These handles are usually used on tilt and turn uPVC windows.
Another kind of uPVC window handle is the Cockspur handle. They are similar to Espag handles, but they have smaller projections from the frame. These handles are usually used on older uPVC window frames.
Additionally, there are Venetian window handles that are similar to the Espag handle, but they have flat bases that allow them to be placed flush with the frame. These handles are a good option for homeowners who want an elegant handle that can blend in with their uPVC frames. These handles come in a range of colors that will match any design.
Measure the spindle
It is important to know how the handle is installed before you can order a replacement. This will determine if it's too tight or loose and if it will fit into the window frame. You can do this by identifying what kind of handle you own and determining the spindle length. The spindle is the steel shaft that connects the handle to the lock in the window frame. The spindle comes in various sizes. The current industry standard is 8mm. Older handles could have a cross-section of 9mm, so you'll have to measure your old handle to ensure you get the right size replacement.
There are various kinds of window handles. The most popular are the inline Espagnolette handles and Cockspur handles. These handles operate a locking system inside the window. They use shootbolt rods that secure the window after it has been closed. They are secured by pins or screws depending on the type of handle you've got.
You can find replacement upvc window handles online and in most DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. For extra security they can be key-locking or non-locking in fire-escape.
To remove the handle simply open the window and unscrew the screws that hold it in place. Store the screws in a container to avoid damage. After the screws have been removed, remove them carefully from the handle. Measure the distance from the base of the spindle up to the top. This will provide you with the information needed to buy the correct replacement. The spindle of the handle is the metal shaft that connects it to the gearbox that locks the window frame.
Remove the old handle
Switching the handle of a uPVC handle is a simple job that takes less than five minutes, if you have the proper tools. The first step is to identify the kind of lock and handle that will help you determine the best replacement windows cost. After that, weighing the spindle will make sure that the new handle is a suitable fit. The handle that was used previously needs to be removed and replaced with the new.
Most uPVC handles come with inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism of the window. They are typically easily removed, but may require force if they get stuck. There are typically two screws that keep the handle in place which can be removed with either pliers or a screwdriver. Depending on the kind of handle, you may also need to remove any pins holding it in place.
After removing the screws, you can then remove the old handle. The top of the base plate should be visible when the handle is in an open position, revealing two screws that you can remove. There's also a small silver or other colour sticker that needs to be removed if it's in place.
It is now possible to screw into the new handle using the screws that came with the old handle. Make sure that the handle is in the unlocked or open position, and then align the screw holes with the holes on the window. After you've done this, you can replace the caps on the screws and test the new handle to ensure that it works correctly. It's simple to swap a uPVC handle, but you have to do it right.
Install the new handle
It's time to put in your new handle if it has been successfully removed the old handle from the frame. Begin by locating and removing the screw covers with your screwdriver. Once the screw covers are removed, place them in a secure location before proceeding to the next step.
Next, insert the new spindle into the handle by lining it up with the hole already in place and screwing it into. Make sure that you align the holes of the handle with holes in the window frame and use a screw that is identical to the ones previously used, or it could cause the handle to not being secure.
uPVC Espag handles are equipped with a 7mm square spindle that turns the lock mechanism that is fitted to the window. This handle style is used in the majority of modern uPVC windows glass replacement near me. uPVC Cockspur handles (also called Cotswold handles) come with an extended nose that locks over the frame's outer or transom bar cross members and are often found in older uPVC windows.
It is essential to lock and unlock the window several times after the handle has been installed. If everything goes according to plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps above will help you diagnose any issues and fix it quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or other glazed home improvements. Our glaziers are able to repair or replace different window frames and handles. This makes us an ideal option for double-glazing.
Test the new handle
In time and with regular use over time, uPVC locks and handles may be damaged and wear and tear. They can become less secure and less effective, so it is important to replace them as soon as you can. This is also a good thing to do when upgrading your windows. Switching the handle and locking mechanism will help maintain your new windows replacements near me' integrity.
When it comes to uPVC window handles, there are a number of different styles. Some are secured with pins or screws, while others have blades that slide into the lock mechanism. Each type has its own method of replacement double glazing windows, therefore it's important to know what type you have before you start working on it.
Espag window handles are the most popular type, and are usually found on newer uPVC windows. These handles come with a spindle that extends out from the handle to the gearbox for locking and, when you open the windows, it triggers the locking mechanism. These handles are also easy to remove. However, you should be cautious not to damage either the mechanism or the handle.
Cockspur handles are another option for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the wedge-shaped striker plates on the frame. This kind of handle may be more difficult to repair than other types, but it's nevertheless a great option for most homes.
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)Venetian handles are joined to the frame by two bolts and glass window Replacement near me they have a narrow projection on the frame. This is different from the Espag handle. They're great if you want an flush handle that blends in with your uPVC windows. These are perfect for commercial and residential properties.
