(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/12/Replacement-Doors-300x200.jpg)UPVC Replacement Door Handles
As time passes, the handles on your doors will wear down and need to be changed. When doing this it is important that the new handles are in line with the critical dimensions of the old handle.
The top screw's position, the lever and the keyhole size are the three measurements you have to determine. Use the size guide to aid you.
Inline Lever/Lever
A lever handle or lever is a modern door handle replacement handle designed to work with new or replacement doors. This style victorian door handle handle is offered in a wide range of styles and finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The door handles made of uPVC/Composite are constructed of durable materials and are perfect for multi point lock doors that require a strong design. The handles are inline and work off the same spindle and screw fixings, so they can be easily incorporated into new or existing uPVC/Composite doors.
The handle can be placed and angled to fit any user. The handle has been tested for endurance up to 200,000 cycles. This ensures that the finish is of high quality and performance over time. The sprung lever is adjustable to accommodate a wide range of locks. This is particularly useful for narrower door frames where the cylinder is located further back. A lever that is shorter is a good choice for doors that have latches that can be operated by a thumb turn located on the inside.
Lever Pad
The lever pad upvc handle differs from the lever handles commonly found on doors. These handles are operated by one spindle, or two spindles, inline or offset. They are typically used on UPVC double glazed doors and are available in a variety of variations and finishes.
The handles have been tested to the minimum of 200 000 cycles and are available in a variety of finishes including White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This gives the handle an outstanding performance and durability to serve the purpose it was designed for.
All UPVC levers for handles come with a spindle, screws and can be mounted on the uPVC door. The backplate fixation centres of 211mm allow for a wider handle, which is usually beneficial when replacing an old or faulty multi-point door lock mechanism. The handle levers are sprung, solving the problem of handles hanging from their horizontal position when they are not in use.
When choosing a replacement handles for upvc windows UPVC handle and spindle it is crucial to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is often called the 'handle centre' or 'cylinder centres which is a crucial aspect of matching up the appropriate handles.
Once you have the correct PZ size, you'll need to ensure that the handle lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) compliant handles that you require for your doors. They are usually a square or round shape, with an internal lever and an external push pad.
The majority of the UPVC Lever Pads we offer are spring-loaded. This means that they will return to a horizontal position after not being used instead of hanging and possibly sticking in the frame. This stops draughts from entering the property. The majority of UPVC lever pad handles are available in left and right handed models which allows them to be installed on either side of the doors.
Euro Cylinder
Cylinder locks are usually found on uPVC doors, but they can also be found on other types of door. The cylinder lock is operated by a key which unlocks the cylinder's case. This exposes pins that can be aligned to those inside the lock, allowing them to rotate the revolving camera, opening the bifold door handle replacement. Euro cylinders can be fitted with up to six pins with internal and external doors typically needing different levels of security.
Selecting the right cylinder for your needs is essential; it depends on the way your doors and handle are used. For instance, doors that are external must be secured with an extra secure cylinder, while internal doors can be secured using an ordinary cylinder. Additionally, certain cylinders are available with extra features that can improve security even more, like anti-drill or anti-bump properties.
To make sure that the euro cylinder is of the right size for your door, it should be measured correctly. The cylinder should be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. If you are unable to measure using the lock in a fixed position, you can take it out of it. It is essential to ensure that there is no extension of the cylinder beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.
The design of many modern cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the risk of attack by causing the cylinder to rotate in a different direction. This can help to deflect attacks and keep your patio door handle replacement safe.
Certain cylinders are made to withstand snapping. This is a typical attack on cylinders. A special tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a lot faster and easier to achieve than gaining access through a multipoint lock and leaves no evidence of a break-in which can hinder an insurance claim.
Spring Cassette
The spring cassette is located in the base of your door handle's backplate, supplying a spring-loaded solution and returning the multipoint lock handles back to their original position after using. There was a time when handles did not have a spring integrated into them and without this they tend to droop or 'drop' once the locking mechanism is removed. This simple component is the most effective way to solve this issue. It also stops your upvc door from becoming stuck in either the closed or open position, as they are difficult to close manually.
These spring cassettes are specifically designed to be used with sprung multipoint locks but they won't work with multipoint handles that are not sprung and you must have a custom hole cut into your backplate to allow these to fit (please look at the image for a technical diagram). These cassettes are a solution for damaged or missing cassettes on the backplate of uPVC door handles. They have an elongated square that accommodates an 8mm spindle and are sold as a set.
These spring cassettes provide an excellent value solution for the problem of sagging door handles. They are simple to install and will prolong the lifespan of your upvc door handle replacement doors. Contact us for more information on our range of uPVC accessories and spares. We are always ready to provide professional advice and assistance you.