(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)patio door locks repair (her explanation)
The locks on your patio doors are crucial to your home's security. If they're not working properly, you put your family and possessions at risk.
It's easy to fix problems with the patio door lock with a few simple steps. This easy fix is to lubricate and cleaning the lock.
Check the Lock
Patio doors are an essential security feature. They must be strong enough to withstand the elements and keep burglars away. However, wear and wear, cold and hot weather dust, and other elements can take their toll on the door frames hinges, hinges, and locking mechanisms, and eventually cause them to stop functioning as they ought to. It is best to be proactive about dealing with these issues and regularly check your sliding door locks for indications of damage and repair the damage if needed.
The most frequent problems with patio door locks is difficulties locking or unlocking them, a latch that is stuck and keys that do not move smoothly. You may have to adjust the mechanism of your lock or tighten screws depending on the issue you're experiencing.
If the issue with your patio door lock is that it's stuck in an open position You can try using a credit card or a flat-head screwdriver to pry it open. If these options don't work, you should consider calling a professional locksmith to help you open the lock without damaging the frame of the door.
The mortise lock that is used on sliding uPVC patio doors usually has a handle and a cylinder which secures the lock. They are secure, but can break or bend in the force of a open patio door that is slammed. It is recommended to check the mortise lock and handle for signs of wear, such as bends or scratches, before it is broken and you need to replace it.
It's an excellent idea to determine the size and position of the current lock by taking a picture using your digital camera. This will enable you to provide these details to a vendor when you're seeking a replacement lock. This will ensure you get the right lock for your door and is compatible to the current mounting setup. It's difficult to install locks that aren't compatible with your existing hardware. This could cause additional problems in the future.
Clean the Lock
patio door track repair doors are the most frequent entrance point into the home and therefore the most frequent target for burglars. Therefore, it is essential that the lock on your patio doors repair near me door is fully functional and conforms to Police & Insurance Standards.
There are some simple steps you can take to repair a lock that is refusing to cooperate. These four steps will help you make sure that your patio sliding door repair doors are operating correctly and providing the security you need.
The first thing that you must do is give the lock a good clean using hot soapy water and a damp towel. You want to wipe away any stains or dirt that may have accumulated on the lock. After this, you can use a dry, clean cloth to wipe away any excess water and allow the lock to dry completely before trying to insert it again.
Next, you need to ensure that the lock is properly lubricated. This is particularly important for uPVC patio doors as they can become very squeaky as they age. Use WD40 or petroleum jelly to lubricate keyways and internal mechanisms. When applying the lubricant, make sure you wipe your keys afterward to avoid spreading any dirt that may have accumulated on it.
After cleaning and lubricating your uPVC patio door repair near me door, you should test it. Check if the door slides effortlessly into and out of its frame. Also, make sure that the hinges and locking points are properly aligned with the frame of the door. You should be able to see the alignment marks on the edge of the door frame and you can fix them by re-aligning your doors to the frame.
Also, it's important to note that there are various types of uPVC patio door locks available and you may need to replace the lock if it is damaged or broken. If you own E2011 patio doors locks, you will need to replace them to be secure with E2469 and E2487 lock assembly. The assemblies comprise three parts comprising an E2014 mortise latch, an escutcheon plate and the lock hasp.
Lubricate the Lock
The mechanism that locks the majority of patio doors is concealed within the door. You can buy an upgrade kit from most home improvement stores and locksmiths when your key cylinder is been damaged or you're looking to upgrade your lock to provide better security. These kits cost $10 to $20 and include tools for opening the lock and an additional key cylinder. Follow the instructions included in your kit to disassemble and clean the old lock, and then put in the new one. Depending on how tight the key cylinder fits in the lock hole it is possible to adjust it slightly for proper operation.
Dry graphite powder can be used to lubricate locks. It is an inexpensive and popular alternative to liquid lubricants, which can draw dust and clog the mechanism. You can buy it at hardware stores, model trains shops, and a few office supply shops. If you choose to use it, make sure that the graphite chunks are free of wood particles. You can also purchase commercial graphite spray. After application to the lock, the solvent present in the spray evaporates and leaves a layer of dry graphite which locks without attracting dust or collecting moisture.
You can also add lubrication to your lock by putting several sprays of WD-40 directly into the keyway. Inject your key out several times to spread the lubricant throughout the lock. After a few minutes, try the key again and see whether it turns easily. If your key is still stuck, try it again few days after the WD-40 has dried.
Change the locks on your patio door is a straightforward task for the majority of homeowners, however the process may be more complicated if you have a sliding door that has an invisible latch and a deadbolt lock that is built-in. If your patio door is fitted with an invisible latch, it is necessary to remove the decorative interior cover by removing the screws that secure it. If your patio door is fitted with deadbolts it will be required to remove the bolt. Install the new lock after you have removed the deadbolt assembly as well as the knob.
Replace the Lock
Patio doors are an important element of your home's security and it's common for them to malfunction from time to time. The debris could get caught in the lock mechanism, or it may wear out over time. A broken patio door latch can be a serious security threat to your home. A regular inspection of the patio door locks can help keep them in good shape and help you quickly fix any problems.
If you find that lubricating your lock fails to solve the problem then it's time to replace it. This is an easy task that most homeowners can handle themselves, however, it's important to carefully follow the instructions to ensure that the new lock is compatible with your current system. It's also a good idea to take the lock you have previously used to the store to ensure that a customer support representative can help you find a replacement.
To replace the handle on a patio door take off the handle. This can be done by unscrewing screws that hold the handle in place. After the handle has been removed, you are able to remove the screws that secure the lock body to the door jamb.
After the screws have been removed after which you can remove the latch body of the door frame. Make sure you fix the lever using a graphite pencil as it will be thrown into the frame and become lost if not secured. The next step is to remove the door strike from the jamb. The hole in which the lock hook is located when the patio door is closed will be exposed. After removing the old door strike, it is possible to put the new one in.
When you are re-screwing the door strike, it's important to use longer screws as they will be used to fix the strike to the frame. Make sure that the new strike is aligned with opening of the door frame and tighten both together.
There are various types of locks for patio doors, but the most common is the central rail key-operated lock. They lock the door into the frame in multiple points and, when the key is inserted, all of the points will be locked. These locks offer a higher level of security than basic locking systems and may result in discounts on homeowner's insurance.