1st_gen_a_c_system_eplacement_how-to_seized_comp_esso
external frameAs seen in the picture below, we already removed the larger line, now to remove that smaller line I just took a small screwdriver and VERY LIGHTLY pried on that black clamp and it popped off very easily . Now before we can entirely remove the housing, we need to go back to the engine bay, near the firewall where the two lines come into the evaporator housing, as we still have a connected line. The glove box should now be out, and you'll see something like this picture below. Remove that piece of duct work by sliding it to the left, then it will pull right out.(Image: https://acambulance.com/wp-content/uploads/2016/05/Air-Conditioner-Maintenance.jpg)
1st_gen_a_c_system_eplacement_how-to_seized_comp_esso.txt · Last modified: 2024/10/08 11:46 by milagromuncy877