(Image: https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1.png)How to Replace a saab spare key 9-3 Key
The Saab 9-3 is a fantastic car that provides a lot of appeal for drivers. It has excellent visibility and an efficient engine. It also has a great safety rating.
However, it's important to ensure that you have two keys working for your vehicle. It is costly to replace a key if you lose it.
How to Replace the Ignition Key on a Saab 9-3
You'll need to replace your car keys in the event that it isn't turning. This guide will walk you through the steps to do it on the Saab 9-3. You will need to replace the key, purchase an updated reprogrammable phone, and purchase a new case for your key-fob.
The majority of modern Saab models use transponders instead of a traditional key to unlock the vehicle and allow it to start. The reprogrammable batteries that are in the key-fob expire, and they cannot hold any charge. This is particularly the case if you use the same key in the same lock.
The good news is that it can be replaced fairly easily by a professional locksmith. If you have the right tools and patience, you can do it yourself. The first step is taking the key-fob from its case. This is done by inserting a flathead screwdriver into the slot located in middle of the case. The plastic is thin, and is easily damaged.
When the case is opened and you are able to prepare the new key by combining the lower portion of the old key and the banana and transponder on the new key. This will ensure the new key is properly mated to your CIM, which can make a significant difference when replacing the sole key on your Saab 9-3.
How to open a saab 93 without A key to Replace the Ignition Key on the Saab 900
Unless you have two keys, you'll need to remove the dashboard and steering wheel to gain access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you are able to remove the trim and dashboard pieces around the steering wheel. Once the dash is removed, you can insert a screwdriver into the opening in the back of the ignition switch and remove it.
The ignition cylinder comes with a key lock which could prevent the vehicle from starting if you don't have the key in it. If the ignition switch on your 900 isn't functioning properly, you should check if the key is in the lock or is stuck inside the barrel. It's also an excellent idea to rotate your keys often and keep them clean so that they don't get bent.
saab key code cars differ from other cars because they don't use traditional keys made of metal. Instead, the car recognizes the electronic signals from the key fob through a special chip embedded in it.
If you lose only one working key fob the dealer will charge the highest dollar for replacing your computer module (known as the CIM). However, we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. You'll save up to 50% off the dealer's cost! This is the SAAB KEY PROGRAM. Find out more about it here!
How to replace the ignition Key on a Saab 9-5
The metal portion of the classic Saab keys is simple to copy and doesn't pose a serious threat to theft of vehicles. The real protection is the electronic component in the key-fob, which has a chip inside that recognizes your car when it is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft system for more than 10 years. It's not as good as a physical lock on the door but it makes the act of stealing your car more difficult. That's why every Saab owner should always keep an extra key on hand.
The majority of new Saabs come with two keys right from the factory. However, you can purchase additional keys at an agent using a handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is NG 9-3 cars, that have newer, more modern features that require a separate key-fob and work through a different process.
The dealer will replace the CIM or TWICE module in these cars if keys have been lost, and charge you a high price for the process. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.
How to replace the ignition Key on a Saab XC90
It may be time to replace your saab key fob repair key fob if it's having trouble turning the barrel of the lock. It's a simple process and you don't need to visit a dealer. Instead you can complete the process yourself at home by using some basic tools.
The first step is to prepare the new key. Before you begin, disable the anti-theft feature by placing blocks under your rear wheels, and then releasing your handbrake. Put the key into the ignition and then turn the key to the “on” position. This will activate the accessories but it will not start the engine. Repeat this procedure 5 times, and then leave the key on the “on” position.
You'll then need to purchase an additional case for your key fob. You can find them at any auto parts store, and they're typically quite affordable. You can get them without electronics, based on the model.
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311170119_2306394586188303_2849487588620745484_nlow.jpg)To open the case, gently push the screwdriver with a flathead into the slot in the middle. The case should break easily and, once you do, you'll have access to the internal electronics. To take the electronics out, employ a small screwdriver and try prying them out with a gentle force.
