Peugeot 308 Key Fob Problems and how to get a new peugeot car key to Fix Them
If your Peugeot 308 key fob has stopped working one day it could be due to a dead battery in the coin or water damage or receiver module issues, or a damaged electronic chip. These are all simple solutions that will restore your car to speed in a matter of minutes!
Car keys can also become faulty because the blade of the key gets worn. You can fix this problem by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The key fob on your peugeot replacement key cost 308 may die or become weak enough to not send a powerful signal. This could cause the key fob to stop working which prevents you from locking and opening the doors, or even starting your engine. You'll need a new battery on your key fob to correct this.
You can purchase a new battery at an auto parts store, or at your local hardware store. When you buy the battery, ensure that it's new and hasn't sat on the shelf for too long. A new battery has more capacity and can send a stronger signal your vehicle.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors won't open it's likely that the issue lies to be in the receiver module of the car which can be programmed by your local Peugeot dealer.
It's possible that the chip inside your key fob has been damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture can wear down over time, especially if your key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To prevent this from occurring, it's crucial to keep your key fob safe from moisture and to never let it come in contact with water.
Water Damage
Don't lose hope on your key fob when it gets wet, whether you slipped into the pool or slipped into a Puddle. While the key fob comes with rubber seals that should protect it from water, long-term exposure to water can cause damage to its electronic chip. Water is a great conductor, and any water that gets inside the key fob could cause short circuits in series which can eventually harm the electronic chip. After removing the batteries, clean the contacts using isopropyl and dry them completely before putting them back in.
Your Peugeot 308 may not start because of a dead battery. If you have an extra car, jumper cables could be used to get the engine running again. If you suspect that the battery is at fault, it will need to be replaced.
Another possibility is a defective receiver inside the vehicle, which can stop it from receiving a signal from the key fob. The key fob might be damaged or there could be an issue with the antenna, wiring or key fob itself. It may be necessary to program a new keyfob for your vehicle if using one. If you cannot fix the problem yourself call a professional technician. A professional who has been trained in the field will be able identify the issue quickly, and fix it immediately.
Radio Interference
The signs of a keys not being recognized or having a narrow range typically indicate that there is interference in the system. The interference could be transmitted or radiated the latter resulting from power and speaker cables getting too close to electrical parts. Generally, re-routing the cables or moving them further away from the components can resolve the issue.
It's unlikely someone is watching the key fob's signal in attempt to steal your vehicle however it is possible that radio interference has ruined the signal. This is a simple problem to solve.
If your key fob not being recognized, try using an entirely new battery. Make sure that the battery is the right size and type. If the battery is not properly sized, it could damage the fob.
Some aftermarket alarm systems and radar detectors operate on the same radio frequency as your key fob and could cause them to interfere with your key signals. It is recommended to avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system contains an antenna that receives radio frequency signals from the key fob. If this receiver has developed a problem, you won't be capable of starting your car even if the key fob works and is modified. This issue could be caused by a variety different ways, such as a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due to an error in the software or internal damage to the key itself.
The battery for your coin in your peugeot key replacement near me 308 keyfob has probably been drained. This battery can be replaced, but you must be sure it's the appropriate battery for the key fob. It is recommended to use an item that has the same size in terms of voltage, size, and specifications as the original.
Another reason the reason your Peugeot 308 key fob might not be working is that it has been paired to an unrelated vehicle. It is possible that you have accidentally given your key fob to a friend, or the key was used to unlock other vehicles. It is possible to fix this issue by reprogramming your key fob using an OBDII scanner. The tool will ask you for programming details about your car for example, its VIN or engine type. It is crucial to enter the correct details.(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg)
